Original file

Ford Focus 1.0 ecoboost Bosch MG1CS016 LA6A-12B684-AB / LA6A-12B684-AB

An original (stock) flash read of the Bosch MG1CS016 control unit, fitted in Ford Focus 1.0 ecoboost, hardware number LA6A-12B684-AB and software number LA6A-12B684-AB, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus 1.0 ecoboost1.0 petrol 125.0PS / 91.9kW
Control unit
Bosch MG1CS016
File size
4,096.00 KB
Contents
Flash
Hardware number
LA6A-12B684-AB
Software number
LA6A-12B684-AB
Bosch part / software
10SW057978
Vehicle maker's hardware number
LX6A-12A650-FBA

Technical data

Vehicle
BrandFord
Car modelFocus 1.0 ecoboost
Engine1.0 petrol 125.0PS / 91.9kW
Control unit
Control unitBosch MG1CS016
ECU makerBosch
Hardware numberLA6A-12B684-AB
Software numberLA6A-12B684-AB
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7ad91da55f1daad9
Identification read from the file
ECU nameMG1CS016
Bosch part / software10SW057978Offset in the file: 0x01C144
Vehicle maker's hardware numberLX6A-12A650-FBAOffset in the file: 0x037030
Software / calibrationLA6A-12B684-ABOffset in the file: 0x037000
Engine descriptionLX6A-14C204-FHDOffset in the file: 0x3FFE4B
Bosch project identifier (EPK)65/1/MG1CS016/22/MG1CS016_A3BC0//MG1CS016_A3BC00_02001_01_00_0///Offset in the file: 0x081200

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS016 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number LA6A-12B684-AB and software number LA6A-12B684-AB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS016

Bosch MG1CS016 original files

The Bosch MG1CS016 unit page