Original file

Ford Focus Bosch MG1CS017 KK1A-12B684-HA / 10SW047466

An original (stock) flash read of the Bosch MG1CS017 control unit, fitted in Ford Focus, hardware number KK1A-12B684-HA and software number 10SW047466, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focuspetrol
Control unit
Bosch MG1CS017
File size
8,192.00 KB
Contents
Flash
Hardware number
KK1A-12B684-HA
Software number
10SW047466
Vehicle maker's hardware number
KX6A-12A650-GA

Technical data

Vehicle
BrandFord
Car modelFocus
Enginepetrol
Control unit
Control unitBosch MG1CS017
ECU makerBosch
Hardware numberKK1A-12B684-HA
Software number10SW047466
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key72bc697abd89cf87
Identification read from the file
ECU nameMG1CS017
Bosch part / software10SW047466Offset in the file: 0x01C144
Vehicle maker's hardware numberKX6A-12A650-GAOffset in the file: 0x037030
Software / calibrationKK1A-12B684-HAOffset in the file: 0x037000
Engine descriptionKX6A-14C204-TAOffset in the file: 0x3FFE4B
Bosch project identifier (EPK)58/1/MG1CS017/22/MG1CS017_D4CF0//MG1CS017_D4CF00_160140///Offset in the file: 0x080220

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS017 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number KK1A-12B684-HA and software number 10SW047466. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS017

HardwareSoftwareVehicles
JX6A-12B684-LA10SW034007Ford Focus 2019 EcoBoost, Ford Focus4
JX6A-12B684-LAKX7A-14C204-AKKFord Focus
JX6A-14C204-CNPBMW Focus
JX6A-14C204-EBGBMW
KK1A-12B684-HAK2GA-14C204-FXDFord Edge
KR3A-12B684-CAKR3ABCEFord Mustang 2.3 STCI
KR3A-12B684-DA10SW031743Ford Mustang, BMW
KR3A-12B684-DA10SW047824Ford Mustang

Bosch MG1CS017 original files

The Bosch MG1CS017 unit page