Original file

Ford Mustang Bosch MG1CS017 KR3A-12B684-DA / 10SW047824

An original (stock) flash read of the Bosch MG1CS017 control unit, fitted in Ford Mustang, hardware number KR3A-12B684-DA and software number 10SW047824, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mustang2.3 petrol
Control unit
Bosch MG1CS017
File size
8,192.00 KB
Contents
Flash
Hardware number
KR3A-12B684-DA
Software number
10SW047824
Vehicle maker's hardware number
KR3A-12A650-HB

Technical data

Vehicle
BrandFord
Car modelMustang
Engine2.3 petrol
Control unit
Control unitBosch MG1CS017
ECU makerBosch
Hardware numberKR3A-12B684-DA
Software number10SW047824
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key0b26429fbc4786f7
Identification read from the file
ECU nameMG1CS017
Bosch part / software10SW047824Offset in the file: 0x01C144
Vehicle maker's hardware numberKR3A-12A650-HBOffset in the file: 0x037030
Software / calibrationKR3A-12B684-DAOffset in the file: 0x037000
Engine descriptionKR3A-14C204-ATHOffset in the file: 0x3FFE4B
Bosch project identifier (EPK)58/1/MG1CS017/22/MG1CS017_D4CA0//MG1CS017_D4CB10_120520///Offset in the file: 0x080220

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS017 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number KR3A-12B684-DA and software number 10SW047824. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS017

HardwareSoftwareVehicles
KK1A-12B684-HA10SW047466Ford Focus
KK1A-12B684-HAK2GA-14C204-FXDFord Edge
KR3A-12B684-CAKR3ABCEFord Mustang 2.3 STCI
KR3A-12B684-DA10SW031743Ford Mustang, BMW
KR3A-12B684-DAKR3A-14C204-APEFord Mustang
KR3A-12B684-DALR3A-14C204-UAFord Mustang
KX6A-14C204-RBCBSK384.H32Ford Focus ST
KX6A-14C204-RBKX6A-14C204-RBFord Focus ST 2.3 EcoBoost

Bosch MG1CS017 original files

The Bosch MG1CS017 unit page