Original file

Ford Edge Bosch MG1CS018 K2GA-12B684-CDA / 10SW046168

An original (stock) flash read of the Bosch MG1CS018 control unit, fitted in Ford Edge, hardware number K2GA-12B684-CDA and software number 10SW046168, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Edge2.7 petrol 335PS
Control unit
Bosch MG1CS018
File size
8,192.00 KB
Contents
Flash
Hardware number
K2GA-12B684-CDA
Software number
10SW046168
Vehicle maker's hardware number
K2GA-12A650-DBA

Technical data

Vehicle
BrandFord
Car modelEdge
Engine2.7 petrol 335PS
Power335.0PS / 246.4kW
Control unit
Control unitBosch MG1CS018
ECU makerBosch
Hardware numberK2GA-12B684-CDA
Software number10SW046168
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key71b0a8969e0bf5a2
Identification read from the file
ECU nameMG1CS018
Bosch part / software10SW046168Offset in the file: 0x01C144
Vehicle maker's hardware numberK2GA-12A650-DBAOffset in the file: 0x037030
Software / calibrationK2GA-12B684-CDAOffset in the file: 0x037000
Engine descriptionK2GA-14C204-GCEOffset in the file: 0x3FFE4B
Bosch project identifier (EPK)57/1/MG1CS018/22/MG1CS018_F4DA0//MG1CS018_F4DB00_16050///Offset in the file: 0x081200

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS018 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K2GA-12B684-CDA and software number 10SW046168. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS018

HardwareSoftwareVehicles
LB5A-14C204-DDRFord Explorer
LB5A-14C204-DDSFord Explorer
MB5A-14C204-AEDFord Explorer
MB5A-14C204-AEHFord Explorer
JL3A-12B684-EA10SW015415Ford F150, Ford F-150
K2GA-12B684-AA10SW031205Ford Edge Export 2.7T US
LB5A-12B684-BA10SW049765Ford Explorer
LB5A-14C204-DDMMG1CS018_F4DD00_01903_00_00_0Ford Explorer

Bosch MG1CS018 original files

The Bosch MG1CS018 unit page