Original file

Peugeot 508 Bosch MG1CS042 0718890261 / 10SW071889

An original (stock) flash read of the Bosch MG1CS042 control unit, fitted in Peugeot 508, hardware number 0718890261 and software number 10SW071889, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 5081.6 · 235.0PS / 172.8kW
Control unit
Bosch MG1CS042
File size
8,192.00 KB
Contents
Flash
Hardware number
0718890261
Software number
10SW071889
Software / calibration
CMM_D125C_01F2EE344BAV_2039W_EL2_Conf15.3.2_CMM_ferme_crypte_v1

Technical data

Vehicle
BrandPeugeot
Car model508
Engine1.6
FuelPetrol
Power235.0PS / 172.8kW
Control unit
Control unitBosch MG1CS042
ECU makerBosch
Hardware number0718890261
Software number10SW071889
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keybda8e4771439fd23
Identification read from the file
ECU nameMG1CS042
Bosch part / software10SW071889Offset in the file: 0x080144
Software / calibrationCMM_D125C_01F2EE344BAV_2039W_EL2_Conf15.3.2_CMM_ferme_crypte_v1Offset in the file: 0x600228
Bosch project identifier (EPK)96/1/MG1CS042/014/D125C//D125C/CMM_D125C_01F2EE344BAV_2039W_EL2_Conf15.3.2_CMM_ferme_crypte_v1//Offset in the file: 0x600228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS042 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0718890261 and software number 10SW071889. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS042

HardwareSoftwareVehicles
10SW059956Peugeot 3008
10SW062246Peugeot 508
10SW064701Opel Grandland X
10SW072544Peugeot
10SW075709Peugeot 308, Peugeot 508
10SW075912Peugeot 308
0261S2177910SW038672Peugeot 308 GTI BPS, Peugeot 508
D075C/D075C2M_G6HX8LSB_1112Z10SW038672Peugeot 5008

Bosch MG1CS042 original files

The Bosch MG1CS042 unit page