Original file
Porsche 911 GT3 RS Bosch MG1CS047 9P1906033A / 051603
An original (stock) flash read of the Bosch MG1CS047 control unit, fitted in Porsche 911 GT3 RS, hardware number 9P1906033A and software number 051603, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Porsche 911 GT3 RS4.0 530PS
- Control unit
- Bosch MG1CS047
- File size
- 8,192.00 KB
- Contents
- Flash
- Hardware number
- 9P1906033A
- Software number
- 051603
- Bosch part / software
- 10SW051603
Technical data
| Brand | Porsche |
|---|---|
| Car model | 911 GT3 RS |
| Engine | 4.0 530PS |
| Fuel | Petrol |
| Control unit | Bosch MG1CS047 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 9P1906033A |
| Software number | 051603 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | d9dc4652bb016602 |
| ECU name | MG1CS047 | |
|---|---|---|
| Bosch part / software | 10SW051603 | Offset in the file: 0x01C144 |
| Bosch project identifier (EPK) | 49/1/MG1CS047/5/P1868//DMG1047P05C1868_MY20O20/// | Offset in the file: 0x080248 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CS047 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 9P1906033A and software number 051603. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MG1CS047
| Hardware | Software | Vehicles |
|---|---|---|
| 9GT906022AN | 077877 | Porsche 992.1 4.0i (GT3) |
| 9GT906022AN | 9GT906022AN | Porsche |
| 9P1906033A | 9P1906033Q | Porsche 991.2 |