Original file

Mini Countryman 2.0T JCW Bosch MG1CS201 00003E7D465005 / 00003E7D_070_080_005

An original (stock) flash read of the Bosch MG1CS201 control unit, fitted in Mini Countryman 2.0T JCW, hardware number 00003E7D465005 and software number 00003E7D_070_080_005, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini Countryman 2.0T JCW2.0 petrol 306.0PS / 225.1kW
Control unit
Bosch MG1CS201
File size
2,048.00 KB
Contents
Flash
Hardware number
00003E7D465005
Software number
00003E7D_070_080_005

Technical data

Vehicle
BrandMini
Car modelCountryman 2.0T JCW
Engine2.0 petrol 306.0PS / 225.1kW
Control unit
Control unitBosch MG1CS201
ECU makerBosch
Hardware number00003E7D465005
Software number00003E7D_070_080_005
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key07bb0a8715e82fdb
Identification read from the file
ECU nameMG1CS201
Bosch project identifier (EPK)56/1/MG1CS201/11/MG1CS201_BX8TUE_R2C2J7N5B//R2C2J7N5B///Offset in the file: 0x154B0F

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS201 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00003E7D465005 and software number 00003E7D_070_080_005. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS201

Bosch MG1CS201 original files

The Bosch MG1CS201 unit page