Original file

BMW X5 xDrive40i 8AT Bosch MG1CS201 0261S22184 / R4C9F4G5B

An original (stock) flash read of the Bosch MG1CS201 control unit, fitted in BMW X5 xDrive40i 8AT, hardware number 0261S22184 and software number R4C9F4G5B, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 xDrive40i 8ATpetrol 340PS
Control unit
Bosch MG1CS201
File size
8,192.00 KB
Contents
Flash
Hardware number
0261S22184
Software number
R4C9F4G5B
Bosch part / software
10SW042517

Technical data

Vehicle
BrandBMW
Car modelX5 xDrive40i 8AT
Enginepetrol 340PS
Displacement3.0
Control unit
Control unitBosch MG1CS201
ECU makerBosch
Hardware number0261S22184
Software numberR4C9F4G5B
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keya250d16d7e19a7b2
Identification read from the file
ECU nameMG1CS201
Bosch part / software0261S22184 / 10SW042517Offset in the file: 0x00C180 / 0x010144
Bosch project identifier (EPK)56/1/MG1CS201/11/MG1CS201_BX8TUE_R4C2F4G5B//R4C2F4G5B///Offset in the file: 0x6ABDC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS201 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S22184 and software number R4C9F4G5B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS201

HardwareSoftwareVehicles
0261S22184R4C2F4C6BBMW X5 X5-40i
0261S22184R4C9F4C6BBMW X5 X5-40i
0261S22184R4C9F4C6BKJAY2BMW X5
0261S22184R4C9F4C6BKJBY0BMW X5
0261S22184R4C9F4K6BKISX2BMW X5 SUV
0261S2219410SW038804BMW 8 Serie - Cabrio
0261S2219410SW042449BMW 8 Serie - Cabrio, BMW 8 Serie, BMW 8er
0261S22194V4C9F4C6BBMW 8 Serie - Cabrio M850i

Bosch MG1CS201 original files

The Bosch MG1CS201 unit page