Original file

BMW Z4 Bosch MG1CS201 DME8.6T-0-B58-S15A-G29-B58B30M1-RWD---RECE-EU6d-TEMP-OPF-PVL / R4C9H5E5BKKOX5

An original (stock) flash read of the Bosch MG1CS201 control unit, fitted in BMW Z4, hardware number DME8.6T-0-B58-S15A-G29-B58B30M1-RWD---RECE-EU6d-TEMP-OPF-PVL and software number R4C9H5E5BKKOX5, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW Z43.0 petrol 340PS
Control unit
Bosch MG1CS201
File size
8,192.00 KB
Contents
Flash
Hardware number
DME8.6T-0-B58-S15A-G29-B58B30M1-RWD---RECE-EU6d-TEMP-OPF-PVL
Software number
R4C9H5E5BKKOX5

Technical data

Vehicle
BrandBMW
Car modelZ4
Engine3.0 petrol 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MG1CS201
ECU makerBosch
Hardware numberDME8.6T-0-B58-S15A-G29-B58B30M1-RWD---RECE-EU6d-TEMP-OPF-PVL
Software numberR4C9H5E5BKKOX5
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key679f260d5f96297f
Identification read from the file
ECU nameMG1CS201
Bosch project identifier (EPK)56/1/MG1CS201/11/MG1CS201_BX8TUE_R4C2H5E5B//R4C2H5E5B///Offset in the file: 0x75B498

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS201 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DME8.6T-0-B58-S15A-G29-B58B30M1-RWD---RECE-EU6d-TEMP-OPF-PVL and software number R4C9H5E5BKKOX5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS201

Bosch MG1CS201 original files

The Bosch MG1CS201 unit page