Original file
Mini Bosch MG1CS201 DST#DME83T1_AluATL_F55_B38A15M1_FWD_EU6c___100kW_PVL / R2C9D393BMUOX4
An original (stock) flash read of the Bosch MG1CS201 control unit, fitted in Mini, hardware number DST#DME83T1_AluATL_F55_B38A15M1_FWD_EU6c___100kW_PVL and software number R2C9D393BMUOX4, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mini100KW
- Control unit
- Bosch MG1CS201
- File size
- 8,192.00 KB
- Contents
- Flash
- Hardware number
- DST#DME83T1_AluATL_F55_B38A15M1_FWD_EU6c___100kW_PVL
- Software number
- R2C9D393BMUOX4
Technical data
| Brand | Mini |
|---|---|
| Engine | 100KW |
| Fuel | Petrol |
| Displacement | 1.5 |
| Control unit | Bosch MG1CS201 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#DME83T1_AluATL_F55_B38A15M1_FWD_EU6c___100kW_PVL |
| Software number | R2C9D393BMUOX4 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | 92847209eb8b2022 |
| ECU name | MG1CS201 | |
|---|---|---|
| Bosch project identifier (EPK) | 56/1/MG1CS201/11/MG1CS201_BX8TUE_R2C2D393B//R2C2D393B/// | Offset in the file: 0x6BD840 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CS201 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#DME83T1_AluATL_F55_B38A15M1_FWD_EU6c___100kW_PVL and software number R2C9D393BMUOX4. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.