Original file

BMW 8 Serie - Cabrio Bosch MG1CS201 H4C996H5BABDIX / H4C996H5BABDIX_F91_AWD_ECE_EU6

An original (stock) flash read of the Bosch MG1CS201 control unit, fitted in BMW 8 Serie - Cabrio, hardware number H4C996H5BABDIX and software number H4C996H5BABDIX_F91_AWD_ECE_EU6, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 8 Serie - Cabrio4.4 460KW
Control unit
Bosch MG1CS201
File size
8,192.00 KB
Contents
Flash
Hardware number
H4C996H5BABDIX
Software number
H4C996H5BABDIX_F91_AWD_ECE_EU6

Technical data

Vehicle
BrandBMW
Car model8 Serie - Cabrio
Engine4.4 460KW
Control unit
Control unitBosch MG1CS201
ECU makerBosch
Hardware numberH4C996H5BABDIX
Software numberH4C996H5BABDIX_F91_AWD_ECE_EU6
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyd7fba7e5b3922ecf
Identification read from the file
ECU nameMG1CS201
Bosch project identifier (EPK)57/1/MG1CS201/11/MG1CS201_S63TUE4_H4C296H5B//H4C296H5B///Offset in the file: 0x752F02

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS201 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number H4C996H5BABDIX and software number H4C996H5BABDIX_F91_AWD_ECE_EU6. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS201

Bosch MG1CS201 original files

The Bosch MG1CS201 unit page