Original file

BMW 8 Serie 40I Bosch MG1CS201 R4C9J718BKKDX6 / R4C9J718B

An original (stock) flash read of the Bosch MG1CS201 control unit, fitted in BMW 8 Serie 40I, hardware number R4C9J718BKKDX6 and software number R4C9J718B, 16,384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 8 Serie 40Ipetrol 340.0PS / 250.1kW
Control unit
Bosch MG1CS201
File size
16,384.00 KB
Contents
Flash
Hardware number
R4C9J718BKKDX6
Software number
R4C9J718B
Bosch part / software
10SW049149

Technical data

Vehicle
BrandBMW
Car model8 Serie 40I
Enginepetrol 340.0PS / 250.1kW
Displacement3.0
Control unit
Control unitBosch MG1CS201
ECU makerBosch
Hardware numberR4C9J718BKKDX6
Software numberR4C9J718B
File
File typeOriginal flash read
File size16,384.00 KB (16,777,216 bytes)
File key305cb62cd781ada7
Identification read from the file
ECU nameMG1CS201
Bosch part / software10SW049149Offset in the file: 0x010144
Bosch project identifier (EPK)56/1/MG1CS201/11/MG1CS201_BX8TUE_R4C2J718B//R4C2J718B///Offset in the file: 0x69F420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS201 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number R4C9J718BKKDX6 and software number R4C9J718B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS201

HardwareSoftwareVehicles
R4C9H6H7BOTEZ2R4C9H6H7BBMW 3 Serie - Sedan 320i
R4C9H6K5BOMFY1R4C9H6K5BBMW 3 Serie - Sedan iL 330i
R4C9H6K5BOTEY1R4C9H6K5BBMW 3 Serie - Sedan 320i
R4C9J718BKKBX6R4C9J718BBMW 8 Serie - Cabrio 840i
R4C9J718BKKDX6R4C9J718BKKDX6BMW 8er
R4C9J718BKLHX6R4C9J718BKLHX6BMW 5er
R4C9J718BOKDX7R4C9J718BBMW X5 X5-30i
R4C9J718BOUGX7R4C9J718BBMW 3 Serie - Sedan 330i

Bosch MG1CS201 original files

The Bosch MG1CS201 unit page