Original file

Volkswagen Touran 03G906021AN / 1037389853

An original (stock) flash read of the unknown control unit control unit, fitted in Volkswagen Touran, hardware number 03G906021AN and software number 1037389853, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touran
Control unit
unknown control unit
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03G906021AN
Software number
1037389853
Software / calibration
03G906021MN

Technical data

Vehicle
BrandVolkswagen
Car modelTouran
Control unit
Control unitunknown control unit
ECU makerBosch
Hardware number03G906021AN
Software number1037389853
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1a76ec72cd32470f
Identification read from the file
Read typeFull read (boot area included)
Bosch part / software1037389853Offset in the file: 0x040010
Vehicle maker's hardware number03G906021ANOffset in the file: 0x1C0CBE
Software / calibration03G906021MN · version 1321Offset in the file: 0x1C0CD2
Engine descriptionR4 2,0L EDCOffset in the file: 0x1C0CE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a unknown control unit whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03G906021AN and software number 1037389853. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of unknown control unit

unknown control unit original files