Original file
Mercedes-Benz G Continental EGS 5WP20122AB
An original (stock) flash read of the Continental EGS control unit, fitted in Mercedes-Benz G, hardware number 5WP20122AB, 832.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz G5.5 petrol 507PS
- Control unit
- Continental EGS
- File size
- 832.00 KB
- Contents
- Flash
- Hardware number
- 5WP20122AB
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | G |
| Engine | 5.5 petrol 507PS |
| Power | 507.0PS / 372.9kW |
| Control unit | Continental EGS |
|---|---|
| ECU maker | Continental |
| Hardware number | 5WP20122AB |
| File type | Original flash read |
|---|---|
| File size | 832.00 KB (851,968 bytes) |
| File key | 2860b83aee989a9b |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Continental EGS whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 5WP20122AB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.