Original file

Dodge Ram Continental GPEC2AG2A18P29V02 / 03666043879

An original (stock) flash read of the Continental GPEC2A control unit, fitted in Dodge Ram, hardware number G2A18P29V02 and software number 03666043879, 4,128.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandDodge
Car modelRam
Engine5.7 petrol 401PS
Fuelpetrol
Displacement5.7
Power401.0PS / 294.9kW
Control unit
Control unitContinental GPEC2A
ECU makerContinental
Hardware numberG2A18P29V02
Software number03666043879
File
File typeOriginal flash read
File size4,128.00 KB
File key9489335e17738677
Price15 €

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental GPEC2A whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number G2A18P29V02 and software number 03666043879. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Continental GPEC2A

Continental GPEC2A original files

The Continental GPEC2A unit page