Original file

BMW 1er Continental MSD80 0049QK0MK80SMWI2S / 0049QK0MK80SWBAUL91040

An original (stock) flash read of the Continental MSD80 control unit, fitted in BMW 1er, hardware number 0049QK0MK80SMWI2S and software number 0049QK0MK80SWBAUL91040, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1er3.0 · 218.0PS / 160.3kW
Control unit
Continental MSD80
File size
2,048.00 KB
Contents
Flash
Hardware number
0049QK0MK80SMWI2S
Software number
0049QK0MK80SWBAUL91040
DME hardware number
7629052
Software / calibration
0049QK0MK80S

Technical data

Vehicle
BrandBMW
Car model1er
Engine3.0
FuelPetrol
Power218.0PS / 160.3kW
Control unit
Control unitContinental MSD80
ECU makerContinental
Hardware number0049QK0MK80SMWI2S
Software number0049QK0MK80SWBAUL91040
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye37372eb703c60eb
Identification read from the file
DME hardware number7629052Offset in the file: 0x01FC26
Software / calibration0049QK0MK80SOffset in the file: 0x01FC00
Data set descriptionCA9QKMK8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental MSD80 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0049QK0MK80SMWI2S and software number 0049QK0MK80SWBAUL91040. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental MSD80

Continental MSD80 original files

The Continental MSD80 unit page