Original file

BMW 3er Continental MSD80 CA4RDQIB4RDQIB000044RD0QIB0SQCQ4S0044RD0QIB0SQCQ4S / 1277777777

An original (stock) flash read of the Continental MSD80 control unit, fitted in BMW 3er, hardware number CA4RDQIB4RDQIB000044RD0QIB0SQCQ4S0044RD0QIB0SQCQ4S and software number 1277777777, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er2.0 · 140.0PS / 103.0kW
Control unit
Continental MSD80
File size
2,048.00 KB
Contents
Flash
Hardware number
CA4RDQIB4RDQIB000044RD0QIB0SQCQ4S0044RD0QIB0SQCQ4S
Software number
1277777777
DME hardware number
7640015
Software / calibration
0044RD0QIB0S

Technical data

Vehicle
BrandBMW
Car model3er
Engine2.0
FuelPetrol
Power140.0PS / 103.0kW
Control unit
Control unitContinental MSD80
ECU makerContinental
Hardware numberCA4RDQIB4RDQIB000044RD0QIB0SQCQ4S0044RD0QIB0SQCQ4S
Software number1277777777
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6542e2dfda7e4ea1
Identification read from the file
Continental / Siemens part numberA2C53246857Offset in the file: 0x000740
DME hardware number7640015Offset in the file: 0x01FC26
Software / calibration0044RD0QIB0SOffset in the file: 0x01FC00
Data set descriptionCA4RDQIB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental MSD80 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CA4RDQIB4RDQIB000044RD0QIB0SQCQ4S0044RD0QIB0SQCQ4S and software number 1277777777. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental MSD80

Continental MSD80 original files

The Continental MSD80 unit page