Original file

Rolls-Royce Ghost Continental MSD87 MSD87-N74-B66-RR4-ECE-BBG20 / 0049SP09800S0KDX8

An original (stock) flash read of the Continental MSD87 control unit, fitted in Rolls-Royce Ghost, hardware number MSD87-N74-B66-RR4-ECE-BBG20 and software number 0049SP09800S0KDX8, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Rolls-Royce Ghost6.6 · 570.0PS / 419.2kW
Control unit
Continental MSD87
File size
2,048.00 KB
Contents
Flash
Hardware number
MSD87-N74-B66-RR4-ECE-BBG20
Software number
0049SP09800S0KDX8

Technical data

Vehicle
BrandRolls-Royce
Car modelGhost
Engine6.6
FuelPetrol
Power570.0PS / 419.2kW
Control unit
Control unitContinental MSD87
ECU makerContinental
Hardware numberMSD87-N74-B66-RR4-ECE-BBG20
Software number0049SP09800S0KDX8
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key22f2199609e923a2
Identification read from the file
ECU nameMSD87
Software / calibration0049SP09800S0KDX8Offset in the file: 0x040010
Data set descriptionCA9SP980

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental MSD87 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MSD87-N74-B66-RR4-ECE-BBG20 and software number 0049SP09800S0KDX8. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental MSD87

Continental MSD87 original files

The Continental MSD87 unit page