Original file

BMW 3er Continental MSD8X 0049ZC0E85XE / 0049ZC0I860S0049ZC0I860S0049ZC0I860S

An original (stock) flash read of the Continental MSD8X control unit, fitted in BMW 3er, hardware number 0049ZC0E85XE and software number 0049ZC0I860S0049ZC0I860S0049ZC0I860S, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er555PS
Control unit
Continental MSD8X
File size
2,048.00 KB
Contents
Flash
Hardware number
0049ZC0E85XE
Software number
0049ZC0I860S0049ZC0I860S0049ZC0I860S
DME hardware number
7639217
Software / calibration
0049ZC0I860S

Technical data

Vehicle
BrandBMW
Car model3er
Engine555PS
Displacement4.4
Power555.0PS / 408.2kW
Control unit
Control unitContinental MSD8X
ECU makerContinental
Hardware number0049ZC0E85XE
Software number0049ZC0I860S0049ZC0I860S0049ZC0I860S
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycfa4972aa1a5d6ce
Identification read from the file
DME hardware number7639217Offset in the file: 0x03FC26
Software / calibration0049ZC0I860SOffset in the file: 0x03FC00
Data set descriptionCA9ZCI86

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental MSD8X whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0049ZC0E85XE and software number 0049ZC0I860S0049ZC0I860S0049ZC0I860S. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental MSD8X

Continental MSD8X original files