Original file

BMW 3er Continental MSS60 0569QT0Z240EEKJV00569QT0Z240EEKJV00569QT0Z240EEKJV / 0569QT0Z241E0569QT0Z241E0569QT0Z241E

An original (stock) flash read of the Continental MSS60 control unit, fitted in BMW 3er, hardware number 0569QT0Z240EEKJV00569QT0Z240EEKJV00569QT0Z240EEKJV and software number 0569QT0Z241E0569QT0Z241E0569QT0Z241E, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er4.0 · 420.0PS / 308.9kW
Control unit
Continental MSS60
File size
256.00 KB
Contents
Flash
Hardware number
0569QT0Z240EEKJV00569QT0Z240EEKJV00569QT0Z240EEKJV
Software number
0569QT0Z241E0569QT0Z241E0569QT0Z241E
DME hardware number
7854317
Software / calibration
0569QT0Z240EEKJV0

Technical data

Vehicle
BrandBMW
Car model3er
Engine4.0
FuelPetrol
Power420.0PS / 308.9kW
Control unit
Control unitContinental MSS60
ECU makerContinental
Hardware number0569QT0Z240EEKJV00569QT0Z240EEKJV00569QT0Z240EEKJV
Software number0569QT0Z241E0569QT0Z241E0569QT0Z241E
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File key94ad11a5aec18e41
Identification read from the file
DME hardware number7854317Offset in the file: 0x02026E
Software / calibration0569QT0Z240EEKJV0Offset in the file: 0x000256

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental MSS60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0569QT0Z240EEKJV00569QT0Z240EEKJV00569QT0Z240EEKJV and software number 0569QT0Z241E0569QT0Z241E0569QT0Z241E. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental MSS60

Continental MSS60 original files

The Continental MSS60 unit page