Original file

Volkswagen Passat 2.0 TDI PPD Continental PPD1.x 03G906018 / SN000F7200000

An original (stock) flash read of the Continental PPD1.x control unit, fitted in Volkswagen Passat 2.0 TDI PPD, hardware number 03G906018 and software number SN000F7200000, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat 2.0 TDI PPD2.0 diesel 140.0PS / 103.0kW
Control unit
Continental PPD1.x
File size
2,048.00 KB
Contents
Flash
Hardware number
03G906018
Software number
SN000F7200000

Technical data

Vehicle
BrandVolkswagen
Car modelPassat 2.0 TDI PPD
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitContinental PPD1.x
ECU makerContinental
Hardware number03G906018
Software numberSN000F7200000
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key93204c9e11aceaf5
Identification read from the file
ECU namePPD1.1
Software / calibration03G906018 · version 8096Offset in the file: 0x040060
Engine descriptionR4 2.0l PPD1.1Offset in the file: 0x04006C
Data set descriptionCASN0F72

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental PPD1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03G906018 and software number SN000F7200000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental PPD1.x

HardwareSoftwareVehicles
03G9060186576286144Volkswagen passat 2.0TDI siemens VDO
03G9060186576286149Volkswagen Passat 2007 Turbodiesel 103KWKW, Volkswagen Passat 2004 Turbodiesel 103KWKW, Volkswagen Golf
03G9060186576286150Volkswagen passat 2.0TDI siemens VDO
03G9060186576286378Volkswagen Passat / Magotan
03G906018SN000F7500000Volkswagen Passat 2.0 TDI PD
03G906018SN0F75Volkswagen Passat 2.0 TDI PD
03G906018A03G906018AAudi A4, Volkswagen
03G906018A6576285202Volkswagen passat 2.0tdi bkp dsg, Volkswagen Passat 2006 Turbodiesel 103KWKW, Volkswagen Passat

Continental PPD1.x original files

The Continental PPD1.x unit page