Original file

Mercedes-Benz B180 Continental SID307 6229000107903680 / S180213502Z9

An original (stock) flash read of the Continental SID307 control unit, fitted in Mercedes-Benz B180, hardware number 6229000107903680 and software number S180213502Z9, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz B1801.5 diesel 109PS
Control unit
Continental SID307
File size
4,096.00 KB
Contents
Flash
Hardware number
6229000107903680
Software number
S180213502Z9
Vehicle maker's hardware number
RFGd498000000
Software / calibration
10371724AA

Technical data

Vehicle
BrandMercedes-Benz
Car modelB180
Engine1.5 diesel 109PS
Power109.0PS / 80.2kW
Control unit
Control unitContinental SID307
ECU makerContinental
Hardware number6229000107903680
Software numberS180213502Z9
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key47a8266e93502b89
Identification read from the file
Continental / Siemens part numberA2C9093410002Offset in the file: 0x000B10
Continental / Siemens software numberS180213502ZOffset in the file: 0x000B40
Vehicle maker's hardware numberRFGd498000000Offset in the file: 0x240023
Software / calibration10371724AAOffset in the file: 0x240010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental SID307 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6229000107903680 and software number S180213502Z9. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental SID307

Continental SID307 original files

The Continental SID307 unit page