Original file

Nissan Juke 2018y 110 BHP Continental SID310 237101384S / S180213501Z9

An original (stock) flash read of the Continental SID310 control unit, fitted in Nissan Juke 2018y 110 BHP, hardware number 237101384S and software number S180213501Z9, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan Juke 2018y 110 BHP1.5 diesel 110BHP
Control unit
Continental SID310
File size
4,096.00 KB
Contents
Flash with its EEPROM
Hardware number
237101384S
Software number
S180213501Z9
Vehicle maker's hardware number
RFE457R000000
Software / calibration
10386855AA

Technical data

Vehicle
BrandNissan
Car modelJuke 2018y 110 BHP
Engine1.5 diesel 110BHP
Control unit
Control unitContinental SID310
ECU makerContinental
Hardware number237101384S
Software numberS180213501Z9
File
File typeOriginal flash read with its EEPROM
File size4,096.00 KB (4,194,304 bytes)
From the file nameNissan Juke 2018y 1.5 dCi
File keyd126db8e41888614
Identification read from the file
Continental / Siemens part numberA2C1251010601Offset in the file: 0x000C00
Continental / Siemens software numberS180213501ZOffset in the file: 0x000B40
Vehicle maker's hardware numberRFE457R000000Offset in the file: 0x240023
Software / calibration10386855AAOffset in the file: 0x240010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental SID310 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 237101384S and software number S180213501Z9. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental SID310

HardwareSoftwareVehicles
237101384S10394864AARenault Duster ii 2018y, Dacia
237101384S10395118AARenault Megane II
237101384S10395124AARenault Megane III
237101384S10395133AARenault Megane
237101987S10387294AARenault TALISMAN
237101987S10387298AARenault Scenic
237101987S10387591AARenault Megane III, Renault Megane
237101987S10387592AARenault Megane

Continental SID310 original files

The Continental SID310 unit page