Original file

Volkswagen Touareg Continental SIMOS 8 5WP46874 / 7P0907551

An original (stock) flash read of the Continental SIMOS 8 control unit, fitted in Volkswagen Touareg, hardware number 5WP46874 and software number 7P0907551, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg3.0 petrol · 290.0PS / 213.3kW
Control unit
Continental SIMOS 8
File size
2,048.00 KB
Contents
Flash
Hardware number
5WP46874
Software number
7P0907551

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg
Engine3.0 petrol
Power290.0PS / 213.3kW
Control unit
Control unitContinental SIMOS 8
ECU makerContinental
Hardware number5WP46874
Software number7P0907551
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc4f299b05428f1ef
Identification read from the file
Continental / Siemens part number5WP46874Offset in the file: 0x000C00
Vehicle maker's hardware number7P0907551Offset in the file: 0x040060
Software / calibration7P0907551 · version 0002Offset in the file: 0x0400A2
Data set descriptionCAS85A60

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental SIMOS 8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 5WP46874 and software number 7P0907551. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental SIMOS 8

Continental SIMOS 8 original files

The Continental SIMOS 8 unit page