Original file

Buick Regal Delco E83 (2MB)

An original (stock) flash read of the Delco E83 (2MB) control unit, fitted in Buick Regal, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandBuick
Car modelRegal
Engine1.6 180PS
Displacement1.6
Power180PS / 132.4kW
Control unit
Control unitDelco E83 (2MB)
ECU makerDelco
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key46de30fc7701c5a1
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delco E83 (2MB) whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Delco E83 (2MB)

HardwareSoftwareVehicles
Buick ExcelleBuick Excelle
Opel CorsaOpel Corsa
12636347Opel Insignia
12637490Opel Corsa
12638662Opel Meriva
1263983486Opel Astra
12641962Opel Meriva, Opel Mokka
12642926Opel Corsa, Opel Meriva, Opel Astra

Delco E83 (2MB) original files

The Delco E83 (2MB) unit page