Original file

GMC Sierra Delco E92

An original (stock) flash read of the Delco E92 control unit, fitted in GMC Sierra, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandGMC
Car modelSierra
Engine4.3 petrol 285HP
Fuelpetrol
Displacement4.3
Power285HP
Control unit
Control unitDelco E92
ECU makerDelco
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb94a4b366d8e4591
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delco E92 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Delco E92

HardwareSoftwareVehicles
12686879Chevrolet Camaro
1310101000Cadillac ATS, Cadillac Zafira C 1.6L, Opel
1267839012667480Chevrolet Camaro
1267839012678400Chevrolet Camaro

Delco E92 original files