Original file

Hymer Delphi CRD3.B0 6519003403 / 6519013502

An original (stock) flash read of the Delphi CRD3.B0 control unit, fitted in Hymer, hardware number 6519003403 and software number 6519013502, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hymer2.2 diesel 163PS
Control unit
Delphi CRD3.B0
File size
4,096.00 KB
Contents
Flash
Hardware number
6519003403
Software number
6519013502
Software / calibration
6519026501

Technical data

Vehicle
BrandHymer
Car modelHymer
Engine2.2 diesel 163PS
Control unit
Control unitDelphi CRD3.B0
ECU makerDelphi
Hardware number6519003403
Software number6519013502
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybc94baa6f24b9a9f
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519003403Offset in the file: 0x003B0F
Software / calibration6519026501Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x01C005
Data set number6519034050Offset in the file: 0x01C030
Boot software6519042500Offset in the file: 0x004154

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3.B0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519003403 and software number 6519013502. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3.B0

Delphi CRD3.B0 original files