Original file

Mercedes-Benz CLA220 Delphi CRD3 0064461540 / 6519037163

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz CLA220, hardware number 0064461540 and software number 6519037163, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLA220diesel 130KW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
0064461540
Software number
6519037163
Vehicle maker's hardware number
6519009702
Software / calibration
6519023202

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLA220
Enginediesel 130KW
Displacement2.1
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number0064461540
Software number6519037163
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0f7dfd17e8cf7dd6
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519009702Offset in the file: 0x003A4D
Software / calibration6519023202Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x007511
Data set number6519037163Offset in the file: 0x01C030
Boot software6519040800Offset in the file: 0x004154
Internal build stringVM01B033_DELIV_1 Jul 18 15:26:14 2012Offset in the file: 0x004120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0064461540 and software number 6519037163. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
00644615406519037123Mercedes-Benz SLK250
00644615406519037140Mercedes-Benz CLA
00644615406519037145Mercedes-Benz E250
00644615406519037159Mercedes-Benz A200
00644615406519037211Mercedes-Benz C200
00644615406519037234Mercedes-Benz CLA200, Mercedes-Benz CLA200 Shooting Break
00644615406519037237Mercedes-Benz E200, Mercedes-Benz A, Mercedes-Benz E
00644615406519037326Mercedes-Benz E220

Delphi CRD3 original files

The Delphi CRD3 unit page