Original file

Mercedes-Benz B180 1.8 CDI Blue Efficiency Delphi CRD3 6519010601 / 6519030707

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz B180 1.8 CDI Blue Efficiency, hardware number 6519010601 and software number 6519030707, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz B180 1.8 CDI Blue Efficiency1.8 diesel 109.0PS / 80.2kW
Control unit
Delphi CRD3
File size
12,288.00 KB
Contents
Flash
Hardware number
6519010601
Software number
6519030707
Vehicle maker's hardware number
6519007600
Software / calibration
6519026400

Technical data

Vehicle
BrandMercedes-Benz
Car modelB180 1.8 CDI Blue Efficiency
Engine1.8 diesel 109.0PS / 80.2kW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number6519010601
Software number6519030707
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File keyc0b60dcb9506651a
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519007600Offset in the file: 0x003A4D
Software / calibration6519026400Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x0073BD
Data set number6519030707Offset in the file: 0x01C030
Boot software6519040301Offset in the file: 0x004154
Internal build stringVM01B031_DELIV_1 Aug 18 11:47:12 2010Offset in the file: 0x804120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519010601 and software number 6519030707. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
6519009901Mercedes-Benz
65190106006519030332Mercedes-Benz Sprinter 2.2d
65190106006519036875Mercedes-Benz Sprinter 313 CDI
65190106006519037328Mercedes-Benz Sprinter 313 CDI
65190109026519037559Mercedes-Benz GLA 200CDI
65190111026519034636Mercedes-Benz CLA220 2.1 CDI
65190111026519036234Mercedes-Benz GLA 220CDI
65190111026519036534Mercedes-Benz CLA200 2.2d

Delphi CRD3 original files

The Delphi CRD3 unit page