Original file

Mercedes-Benz Sprinter Delphi CRD3 6519013602 / 6519033754

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz Sprinter, hardware number 6519013602 and software number 6519033754, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinterdiesel 114.0PS / 83.8kW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
6519013602
Software number
6519033754
Vehicle maker's hardware number
6519003603
Software / calibration
6519021703

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Enginediesel 114.0PS / 83.8kW
Displacement2.2
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number6519013602
Software number6519033754
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya759a864a6d0a030
Identification read from the file
Vehicle maker's hardware number6519003603Offset in the file: 0x003B0F
Software / calibration6519021703Offset in the file: 0x3FFF34
Data set number6519033754Offset in the file: 0x01C030
Boot software6519042800Offset in the file: 0x004154

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519013602 and software number 6519033754. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
65190129026519032137Mercedes-Benz Sprinter 316 CDI
65190129026519032139Mercedes-Benz Sprinter 220CDI
65190135026519030549Mercedes-Benz Sprinter 220CDI
65190135026519033850Mercedes-Benz Sprinter 514 220CDI
65190136026519034454Mercedes-Benz Sprinter 220CDI
65190136026519035154Mercedes-Benz Sprinter 220CDI
65190140006519031746Mercedes-Benz C250 2.1 CDI Blue Efficiency
65190140006519034666Mercedes-Benz C250

Delphi CRD3 original files

The Delphi CRD3 unit page