Original file

Mercedes-Benz A200 Delphi CRD3 6519040301 / 6519034624

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz A200, hardware number 6519040301 and software number 6519034624, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A200diesel 136.0PS / 100.0kW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
6519040301
Software number
6519034624
Vehicle maker's hardware number
6519007600
Software / calibration
6519023101

Technical data

Vehicle
BrandMercedes-Benz
Car modelA200
Enginediesel 136.0PS / 100.0kW
Displacement2.1
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number6519040301
Software number6519034624
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye6bc42eeee5f318d
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519007600Offset in the file: 0x003A4D
Software / calibration6519023101Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x0073BD
Data set number6519034624Offset in the file: 0x01C030
Boot software6519040301Offset in the file: 0x004154
Internal build stringVM01B031_DELIV_1 Aug 18 11:47:12 2010Offset in the file: 0x004120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519040301 and software number 6519034624. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
65190400016519038922Mercedes-Benz GLK220 2.2 CDI R4
65190400016519039720Mercedes-Benz E250 2.2 CDI R4
65190403016519031768Mercedes-Benz CLA220 2.2 CDI
65190403016519034560Mercedes-Benz A200 1.8 CDI Blue Efficiency
65190403016519034660Mercedes-Benz A200 1.8 CDI Blue Efficiency
65190403016519034760Mercedes-Benz CLA200 1.8 Blue Efficiency
65190403016519037531Mercedes-Benz B 200
65190403016519037665Mercedes-Benz E220 2.2 CDI R4

Delphi CRD3 original files

The Delphi CRD3 unit page