Original file

Mercedes-Benz Sprinter 2.2 CDI R4 Delphi CRD3 6519040700 / 6519035525

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz Sprinter 2.2 CDI R4, hardware number 6519040700 and software number 6519035525, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 2.2 CDI R42.2 diesel 129.0PS / 94.9kW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
6519040700
Software number
6519035525
Vehicle maker's hardware number
6519000700
Software / calibration
6519024601

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 2.2 CDI R4
Engine2.2 diesel 129.0PS / 94.9kW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number6519040700
Software number6519035525
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc0367c77fd93b610
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519000700Offset in the file: 0x003A4D
Software / calibration6519024601Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x0073BD
Data set number6519035525Offset in the file: 0x01C030
Boot software6519040700Offset in the file: 0x004154
Internal build stringVM01B031_DELIV_1 Aug 18 11:47:12 2010Offset in the file: 0x004120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519040700 and software number 6519035525. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
65190407006519031639Mercedes-Benz Sprinter210/310/410 2.2L 16V CDI, Mercedes-Benz Sprinter210/310/510 2.2 CDI
65190407006519031839Mercedes-Benz Sprinter213/313/413
65190407006519032337Mercedes-Benz Sprinter213/313/413 2.2 CDI R4, Mercedes-Benz Sprinter213/313 2.2 CDI R4
65190407006519035325Mercedes-Benz Sprinter 2.2 CDI R4
65190407006519036775Mercedes-Benz Sprinter 210/310/510 CDI
65190407006519036835Mercedes-Benz Sprinter213/313/413
65190407006519037275Mercedes-Benz Sprinter 2.2 CDI R4
65190408006519030234Mercedes-Benz CLA220 2.1 CDI

Delphi CRD3 original files

The Delphi CRD3 unit page