Original file

Mercedes-Benz B200 Delphi CRD3 CRD3-651-WMB66D2 / 6519030907

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz B200, hardware number CRD3-651-WMB66D2 and software number 6519030907, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz B2002.2 diesel 136PS
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
CRD3-651-WMB66D2
Software number
6519030907
Vehicle maker's hardware number
6519007600
Software / calibration
6519026400

Technical data

Vehicle
BrandMercedes-Benz
Car modelB200
Engine2.2 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware numberCRD3-651-WMB66D2
Software number6519030907
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb593b2445359d665
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519007600Offset in the file: 0x003A4D
Software / calibration6519026400Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x0073BD
Data set number6519030907Offset in the file: 0x01C030
Boot software6519040301Offset in the file: 0x004154
Internal build stringVM01B031_DELIV_1 Aug 18 11:47:12 2010Offset in the file: 0x004120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRD3-651-WMB66D2 and software number 6519030907. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
CRD3-651-WMA4ID416519039476Mercedes-Benz E
CRD3-651-WMB66D26519030607Mercedes-Benz B180, Mercedes-Benz B, Mercedes-Benz MB
CRD3-651-WMB66D26519030707Mercedes-Benz B, Mercedes-Benz B180
CRD3-651-WMB66D26519030807Mercedes-Benz B200, Mercedes-Benz MB
CRD3-651-WMCA5D216519035430Mercedes-Benz C, Mercedes-Benz C220
CRD3-651-WMCA5D216519035630Mercedes-Benz C220
CRD3-651-WMCA5D216519039131Mercedes-Benz C220
CRD3-651-WMCB4D116519014000Mercedes-Benz C220, Mercedes-Benz C250, Mercedes-Benz C

Delphi CRD3 original files

The Delphi CRD3 unit page