Original file
Mercedes-Benz C Delphi CRD3 DS05_ME155101 / 6519030746
An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz C, hardware number DS05_ME155101 and software number 6519030746, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Cdiesel 125KW
- Control unit
- Delphi CRD3
- File size
- 4,096.00 KB
- Contents
- Flash
- Hardware number
- DS05_ME155101
- Software number
- 6519030746
- Vehicle maker's hardware number
- 6519004500
- Software / calibration
- 6519024202
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | C |
| Engine | diesel 125KW |
| Displacement | 6.5 |
| Control unit | Delphi CRD3 |
|---|---|
| ECU maker | Delphi |
| Hardware number | DS05_ME155101 |
| Software number | 6519030746 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 05cdee6b74f804c8 |
| ECU name | CRD3 | |
|---|---|---|
| Vehicle maker's hardware number | 6519004500 | Offset in the file: 0x003A4D |
| Software / calibration | 6519024202 | Offset in the file: 0x3FFF34 |
| Engine code | OM651 | Offset in the file: 0x0072A1 |
| Data set number | 6519030746 | Offset in the file: 0x01C030 |
| Boot software | 6519040900 | Offset in the file: 0x004154 |
| Internal build string | WM03B011_DELIV_1 Jul 19 16:00:00 2012 | Offset in the file: 0x004120 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DS05_ME155101 and software number 6519030746. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Delphi CRD3
| Hardware | Software | Vehicles |
|---|---|---|
| CRD3-651-WMN62D11-L53E-125KW-EU6OPS-AT-SOP-012_N_ME02a | 6519021902 | Infiniti Q70 |
| CRD3-651-WMN62D11-L53H-125KW-EU6OPS-AT-SOP-012_N_ME02a | 6519021902 | Infiniti Q50, Infiniti Infinty |
| DS008_ME184200 | 6519035261 | Mercedes-Benz Sprinter |
| DS008_ME184200 | 6519035461 | Mercedes-Benz Sprinter |
| DS06_ME1635 | 6519036447 | Mercedes-Benz C |
| DS07_ME210400 | 6519036975 | Mercedes-Benz Sprinter |
| DS08_ME164601 | 6519030249 | Mercedes-Benz Sprinter |
| DS08_ME164601 | 6519030349 | Mercedes-Benz Sprinter |