Original file

Mercedes-Benz C Delphi CRD3 DS06_ME1635 / 6519036447

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz C, hardware number DS06_ME1635 and software number 6519036447, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Cdiesel 150KW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
DS06_ME1635
Software number
6519036447
Vehicle maker's hardware number
6519005203
Software / calibration
6519027602

Technical data

Vehicle
BrandMercedes-Benz
Car modelC
Enginediesel 150KW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware numberDS06_ME1635
Software number6519036447
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key224d13b84709f97f
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519005203Offset in the file: 0x003B0F
Software / calibration6519027602Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x01C005
Data set number6519036447Offset in the file: 0x01C030
Boot software6519042300Offset in the file: 0x004154

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DS06_ME1635 and software number 6519036447. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
CRD3-651-WMN62D11-L53H-125KW-EU6OPS-AT-SOP-012_N_ME02a6519021902Infiniti Q50, Infiniti Infinty
DS008_ME1842006519035261Mercedes-Benz Sprinter
DS008_ME1842006519035461Mercedes-Benz Sprinter
DS05_ME1551016519030746Mercedes-Benz C
DS07_ME2104006519036975Mercedes-Benz Sprinter
DS08_ME1646016519030249Mercedes-Benz Sprinter
DS08_ME1646016519030349Mercedes-Benz Sprinter
DS09_ME1925016519034066Mercedes-Benz C

Delphi CRD3 original files

The Delphi CRD3 unit page