Original file
Great Wall F7x Delphi MT92.1 3612100XEC36
An original (stock) flash read of the Delphi MT92.1 control unit, fitted in Great Wall F7x, hardware number 3612100XEC36, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Great Wall F7x2.0 245PS
- Control unit
- Delphi MT92.1
- File size
- 2,560.00 KB
- Contents
- Flash
- Hardware number
- 3612100XEC36
Technical data
| Brand | Great Wall |
|---|---|
| Car model | F7x |
| Engine | 2.0 245PS |
| Fuel | Petrol |
| Power | 245PS / 180.2kW |
| Control unit | Delphi MT92.1 |
|---|---|
| ECU maker | Delphi |
| Hardware number | 3612100XEC36 |
| File type | Original flash read |
|---|---|
| File size | 2,560.00 KB (2,621,440 bytes) |
| File key | 7511a3258a73c4d6 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Delphi MT92.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 3612100XEC36. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.