Original file

Mitsubishi Lancer Denso 1860B47702

An original (stock) flash read of the Denso control unit, fitted in Mitsubishi Lancer, software number 1860B47702, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandMitsubishi
Car modelLancer
Engine2.0 petrol 295PS
Fuelpetrol
Displacement2.0
Power295.0PS / 217.0kW
Control unit
Control unitDenso
ECU makerDenso
Software number1860B47702
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File key5a1ed895c62bd3c4
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1860B47702. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Denso

HardwareSoftwareVehicles
1037389882BMW
1187237108Nissan X-Trail
1525852419Subaru Impreza
1606127967Renault Megane
1860B59701Mitsubishi Outlander
1860C04502Mitsubishi Lancer
1860C30000Mitsubishi ASX
2003SCFBA03B86GC00437Aston Martin V8 Vantage

Denso original files