Original file

Toyota Denso Gen3 (4MB) 89663-26X20

An original (stock) flash read of the Denso Gen3 (4MB) control unit, fitted in Toyota, hardware number 89663-26X20, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandToyota
Engine1.6
Displacement1.6
Control unit
Control unitDenso Gen3 (4MB)
ECU makerDenso
Hardware number89663-26X20
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameToyota Denso Software SV 7.3
File key4c4eb40f1797c612
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso Gen3 (4MB) whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 89663-26X20. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Denso Gen3 (4MB)

HardwareSoftwareVehicles
89663-26J02Toyota Hilux
89663-26N50-AToyota Hilux
89663-26T31Toyota Hiace
89663-26T40Toyota Granvia
89663-33P45Toyota Camry
89663-33P60-DToyota Camry
89663-33Q50Toyota Camry
89663-33V20Lexus ES200 2.5L 2019y

Denso Gen3 (4MB) original files

The Denso Gen3 (4MB) unit page