Original file
Mazda 6 Denso R2A R2BF-18881-A / R2BF-188K2-E
An original (stock) flash read of the Denso R2A control unit, fitted in Mazda 6, hardware number R2BF-18881-A and software number R2BF-188K2-E, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mazda 62.2 diesel · 130.0PS / 95.6kW
- Control unit
- Denso R2A
- File size
- 1,024.00 KB
- Contents
- Flash
- Hardware number
- R2BF-18881-A
- Software number
- R2BF-188K2-E
Technical data
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Denso R2A whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number R2BF-18881-A and software number R2BF-188K2-E. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Denso R2A
| Hardware | Software | Vehicles |
|---|---|---|
| R2AA-188K1-D | R2BS-18881-A | Mazda 3 |