Original file

Volkswagen Polo Marelli IAW7GV XC2785 03C906014BS

An original (stock) flash read of the Marelli IAW7GV XC2785 control unit, fitted in Volkswagen Polo, hardware number 03C906014BS, 768.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.4 petrol 75PS
Control unit
Marelli IAW7GV XC2785
File size
768.00 KB
Contents
Flash
Hardware number
03C906014BS

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.4 petrol 75PS
Power75.0PS / 55.2kW
Control unit
Control unitMarelli IAW7GV XC2785
ECU makerMarelli
Hardware number03C906014BS
File
File typeOriginal flash read
File size768.00 KB (786,432 bytes)
File keye3b263112988b008

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Marelli IAW7GV XC2785 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03C906014BS. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Marelli IAW7GV XC2785

Marelli IAW7GV XC2785 original files