Original file

Dodge Ram Motorola NGC5

An original (stock) flash read of the Motorola NGC5 control unit, fitted in Dodge Ram, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandDodge
Car modelRam
Engine5.7 petrol 340PS
Fuelpetrol
Displacement5.7
Power340.0PS / 250.1kW
Control unit
Control unitMotorola NGC5
ECU makerMotorola
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7cfe461fd4ce617f
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Motorola NGC5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizeFrom the file nameContentsPriceAdd to cart
Dodge Ram1,792.00 KBFlash€15Add to cart

All reads of Dodge Ram

Other pairs of Motorola NGC5

HardwareSoftwareVehicles
Jeep Grand CherokeeJeep Grand Cherokee
Jeep WranglerJeep Wrangler

Motorola NGC5 original files

The Motorola NGC5 unit page