Original file

Smart Forfour E6T42xxx 1860A442 / JM4601

An original (stock) flash read of the E6T42xxx control unit, fitted in Smart Forfour, hardware number 1860A442 and software number JM4601, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart Forfour1.3 petrol 95PS
Control unit
E6T42xxx
File size
512.00 KB
Contents
Flash
Hardware number
1860A442
Software number
JM4601

Technical data

Vehicle
BrandSmart
Car modelForfour
Engine1.3 petrol 95PS
Power95.0PS / 69.9kW
Control unit
Control unitE6T42xxx
Hardware number1860A442
Software numberJM4601
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File keyf73906b9b8a64088

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a E6T42xxx whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 1860A442 and software number JM4601. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of E6T42xxx

E6T42xxx original files