Original file
Aston Martin DB9 EECM1E007AH
An original (stock) flash read of the EECM control unit, fitted in Aston Martin DB9, software number 1E007AH, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Technical data
| Brand | Aston Martin |
|---|---|
| Car model | DB9 |
| Engine | 5.9 |
| Fuel | petrol |
| Displacement | 5.9 |
| Power | 450.0PS / 331.0kW |
| Control unit | EECM |
|---|---|
| Software number | 1E007AH |
| File type | Original flash read |
|---|---|
| File size | 1,024.00 KB |
| File key | b0d268e35ef2134b |
| Price | 15 € |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a EECM whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 1E007AH. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.
Other pairs of EECM
| Hardware | Software | Vehicles |
|---|---|---|
| 1E006AN | Aston Martin DB9 | |
| 2003SCFAC02A15GB03478 | Aston Martin DB9 |