Original file

BMW 5er G EGS TCU231-8PXYH / BMW_8PXYPH_70002_ZHQB0300

An original (stock) flash read of the EGS control unit, fitted in BMW 5er G, hardware number TCU231-8PXYH and software number BMW_8PXYPH_70002_ZHQB0300, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er G3.0 petrol 306PS
Control unit
EGS
File size
2,560.00 KB
Contents
Flash
Hardware number
TCU231-8PXYH
Software number
BMW_8PXYPH_70002_ZHQB0300

Technical data

Vehicle
BrandBMW
Car model5er G
Engine3.0 petrol 306PS
Power306PS / 225.1kW
Control unit
Control unitEGS
Hardware numberTCU231-8PXYH
Software numberBMW_8PXYPH_70002_ZHQB0300
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key19ff6a87c4bcc5af

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a EGS whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number TCU231-8PXYH and software number BMW_8PXYPH_70002_ZHQB0300. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of EGS

EGS original files