Original file
Renault Megane 3 2.0 TCE EMS31xx 0233R0311R / 371003758220072542
An original (stock) flash read of the EMS31xx control unit, fitted in Renault Megane 3 2.0 TCE, hardware number 0233R0311R and software number 371003758220072542, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Renault Megane 3 2.0 TCE2.0 180.0PS / 132.4kW
- Control unit
- EMS31xx
- File size
- 2,048.00 KB
- Contents
- Flash
- Hardware number
- 0233R0311R
- Software number
- 371003758220072542
- Vehicle maker's hardware number
- RD95569200000
- Software / calibration
- 10151257AA
Technical data
| Brand | Renault |
|---|---|
| Car model | Megane 3 2.0 TCE |
| Engine | 2.0 180.0PS / 132.4kW |
| Fuel | Petrol |
| Control unit | EMS31xx |
|---|---|
| Hardware number | 0233R0311R |
| Software number | 371003758220072542 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 71dbbd2fac152ca3 |
| Vehicle maker's hardware number | RD95569200000 | Offset in the file: 0x020023 |
|---|---|---|
| Software / calibration | 10151257AA | Offset in the file: 0x020010 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a EMS31xx whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0233R0311R and software number 371003758220072542. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.