Original file

Renault Kangoo EMS3xxx CARDB800RDB8000010293440AA / 37105290HRMLGT9937

An original (stock) flash read of the EMS3xxx control unit, fitted in Renault Kangoo, hardware number CARDB800RDB8000010293440AA and software number 37105290HRMLGT9937, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Kangoo1.2 · 115.0PS / 84.6kW
Control unit
EMS3xxx
File size
2,048.00 KB
Contents
Flash
Hardware number
CARDB800RDB8000010293440AA
Software number
37105290HRMLGT9937
Vehicle maker's hardware number
RDB2180000000
Software / calibration
10293440AA

Technical data

Vehicle
BrandRenault
Car modelKangoo
Engine1.2
FuelPetrol
Power115.0PS / 84.6kW
Control unit
Control unitEMS3xxx
Hardware numberCARDB800RDB8000010293440AA
Software number37105290HRMLGT9937
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya479d202af64bce3
Identification read from the file
Vehicle maker's hardware numberRDB2180000000Offset in the file: 0x1C0023
Software / calibration10293440AAOffset in the file: 0x1C0010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a EMS3xxx whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CARDB800RDB8000010293440AA and software number 37105290HRMLGT9937. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of EMS3xxx

EMS3xxx original files