Original file

Renault Clio IV EMS3xxx CARDB800RDB8000010300757AA / 37105933HRMLGT8142

An original (stock) flash read of the EMS3xxx control unit, fitted in Renault Clio IV, hardware number CARDB800RDB8000010300757AA and software number 37105933HRMLGT8142, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Clio IV1.6 · 200.0PS / 147.1kW
Control unit
EMS3xxx
File size
2,048.00 KB
Contents
Flash
Hardware number
CARDB800RDB8000010300757AA
Software number
37105933HRMLGT8142
Vehicle maker's hardware number
RDB2180000000
Software / calibration
10300757AA

Technical data

Vehicle
BrandRenault
Car modelClio IV
Engine1.6
FuelPetrol
Power200.0PS / 147.1kW
Control unit
Control unitEMS3xxx
Hardware numberCARDB800RDB8000010300757AA
Software number37105933HRMLGT8142
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4e940345b8f53a89
Identification read from the file
Vehicle maker's hardware numberRDB2180000000Offset in the file: 0x1C0023
Software / calibration10300757AAOffset in the file: 0x1C0010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a EMS3xxx whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CARDB800RDB8000010300757AA and software number 37105933HRMLGT8142. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of EMS3xxx

EMS3xxx original files