Original file

Audi A6 GS19 ZF 6HP19A 4F2910156T

An original (stock) flash read of the GS19 ZF 6HP19A control unit, fitted in Audi A6, hardware number 4F2910156T, 192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel 235PS
Control unit
GS19 ZF 6HP19A
File size
192.00 KB
Contents
Flash
Hardware number
4F2910156T

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel 235PS
Power235.2PS / 173.0kW
Control unit
Control unitGS19 ZF 6HP19A
Hardware number4F2910156T
File
File typeOriginal flash read
File size192.00 KB (196,608 bytes)
File key3615dfe1b0485127

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a GS19 ZF 6HP19A whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4F2910156T. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of GS19 ZF 6HP19A

HardwareSoftwareVehicles
4F2910156T4F2910156TAudi A6

GS19 ZF 6HP19A original files