Original file
Mercedes-Benz E55 AMG V8 Benzin M2.0
An original (stock) flash read of the M2.0 control unit, fitted in Mercedes-Benz E55 AMG V8 Benzin, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
- Vehicle
- Mercedes-Benz E55 AMG V8 Benzin5.5 · 476.0PS / 350.1kW
- Control unit
- M2.0
- File size
- 256.00 KB
- Contents
- Flash
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E55 AMG V8 Benzin |
| Engine | 5.5 |
| Fuel | Petrol |
| Power | 476.0PS / 350.1kW |
| Control unit | M2.0 |
|---|
| File type | Original flash read |
|---|---|
| File size | 256.00 KB (262,144 bytes) |
| From the file name | MB E55 5.5 AMG V8 |
| File key | de9ff9944e85aa68 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a M2.0 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.