Original file
BMW 3 Serie - Sedan Bosch MEVD17.2.x 10SW000000
An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 3 Serie - Sedan, software number 10SW000000, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3 Serie - Sedan3.0 petrol 305PS
- Control unit
- Bosch MEVD17.2.x
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Software number
- 10SW000000
- Software / calibration
- 75S9EI0B / 9EITARX0
Technical data
| Brand | BMW |
|---|---|
| Car model | 3 Serie - Sedan |
| Engine | 3.0 petrol 305PS |
| Power | 305.9PS / 225.0kW |
| Control unit | Bosch MEVD17.2.x |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW000000 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 35681cfa909458c7 |
| ECU name | MEVD17.2.6 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW000000 | Offset in the file: 0x18001A |
| Software / calibration | 75S9EI0B / 9EITARX0 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.S-N55-M0-B30-F030-ULEV2-MSA2-_HGAG-LL-RL-Allrad-PVL-BHDP-RT | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD1726_75S9EI0B//75S9EI0B/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW000000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.x
| Hardware | Software | Vehicles |
|---|---|---|
| 1037544340 | BMW 3 Serie - Sedan | |
| 1037545710 | BMW E89 | |
| 1037545824 | BMW 3 Serie - Sedan iL, BMW 5 Serie | |
| 1037547650 | BMW 5 Serie - Sedan, BMW 5 Serie, BMW F25 | |
| 10SW000742 | BMW X5 SUV | |
| 10SW001405 | BMW X5, BMW X5 SUV | |
| 10SW003797 | BMW Z4, BMW X1 | |
| 10SW003920 | BMW X5 SUV, BMW X5 |